Connect the Daimer XPH-9650 carpet extractor to a water source using the 50’ hose and activate the Auto-Fill system. Pre-spray carpets with a cleaning solution and let it sit for 15 minutes. Use the portable carpet extractor, adjusting the pressure for deep cleaning. Ensure superior water suction and heat for the best results. After setting … Read more
To use a Daimer carpet cleaner, first vacuum the carpet thoroughly. Next, mix Eco-Green® Carpet Care solution. Apply it on a small area, up to 250 sq. ft. Check the machine condition before use. Remove furniture before cleaning and use minimal water for the best results. Next, plug in the Daimer Carpet Cleaner and allow … Read more
To use the Crofton Carpet Cleaner, plug it in and turn it on with the on/off switch. Fill the clean tank with water. Press the trigger to release the cleaning solution. When done, empty and rinse both the clean and dirty tanks. Follow usage guidelines and safety precautions. Avoid abrasive cleaners for maintenance. Once the … Read more
To use the Clarke Clean Track carpet extractor, fill the solution tank with water and cleaning solution. Adjust the settings for optimal cleaning performance. Operate the Clarke EX40 in overlapping passes for deep cleaning and effective stain removal. After use, empty and rinse the tanks. Follow usage instructions for ergonomic safety and minimal disruption. Begin … Read more
To clean carpets with citric acid, dilute 8–10 tablespoons of citric acid in one gallon of hot water. Use a pump-up or trigger sprayer to mist the solution lightly on the carpet. Let it dry completely before vacuuming to effectively remove dirt and stains. Use a clean cloth to gently blot the area. Avoid rubbing, … Read more
To use Chemical Guys Carpet Cleaner, apply Foaming Citrus or Lightning Fast Stain Remover directly on the carpet. Attach the upholstery brush to your DA polisher for effective scrubbing action. For best results, dilute the cleaner 20:1, spray the area, tackle stains, and enjoy fresh, clean automotive carpets. In addition to stain removal, Chemical Guys … Read more
To use Cavalier Bremworth Dry Stain Remover, begin by scraping away solids. Make sure the stain is dry. Lightly spray the remover and vacuum the area with a fine nozzle. For liquid spills, apply water, then blot with a cloth. Let it dry completely for the best results. This process ensures clarity and accuracy in … Read more
The Castex Anser Carpet Extractor is a compact, efficient tool for upholstery cleaning and quick spot removal. To use it, fill the tank with water and cleaning solution, then plug it in. Follow the user manual for operation instructions, safety tips, and maintenance guidelines to ensure effective cleaning. For optimal cleaning results, use the following … Read more
To use a carpet washing machine, move in straight lines. Squeeze the trigger to release water and push the machine forward. Release the trigger and pull it back over the same line. After one stripe, shift over to the next line. Repeat this movement pattern until you clean the entire room effectively. Once the machine … Read more
To use a carpet washer, first vacuum the carpet and pre-treat any stains. Fill the water tank with hot water and the recommended cleaning formula. Plug in the machine, choose the appropriate carpet cleaner settings, and move it slowly across the carpet. Make wet passes followed by drying passes for optimal results. Once the carpet … Read more