Carpet

To use a bristle carpet cleaner, first vacuum the area to remove dirt. Pre-treat any stains. Fill the water tank with hot water and cleaning formula. Plug it in and select the desired mode. Press the spray trigger to apply cleaner, and move the cleaner slowly over the soiled area. Finally, rinse by going over … Read more

The Blue Hawk Carpet Cutter is for cutting carpet. To use it, first score the carpet surface in a straight line. Next, place the pressure plate on the scored line and apply downward pressure to cut through. Always follow safety tips, as the cutter’s teeth are sharp. This DIY guide helps with flooring installation. Place … Read more

To use a Bistle carpet cleaner, plug it in and turn it on. Make two wet passes. Press the trigger to release the cleaning solution. Release the trigger. Then, make two drying passes over the same area. Repeat this process until the extracted solution appears clean. Next, operate the cleaner in a systematic manner. Start … Read more

To use a Bissell ReadyClean Carpet Cleaner, fill the tank with clean water and a Bissell cleaning formula. Plug in the machine and turn it on. Make slow, overlapping passes over the carpet. After cleaning, empty and rinse the tanks. For setup, maintenance, troubleshooting, and warranty details, consult the user guide. Turn on the Bissell … Read more

To use the BISSELL ReadyClean carpet cleaner, fill the tanks with water and cleaning formula, then plug it in. Move the machine slowly across the carpet for effective cleaning. For maintenance, clean the tanks and brushes regularly. For troubleshooting, refer to the user guide for issues like no power or low suction. Once prepared, plug … Read more

To use the Bissell Quickwash Carpet Cleaner, first fill the clean water tank with a genuine BISSELL cleaning solution. Plug in the cleaner. Hold it upright at the carpet’s edge while cleaning. Afterward, empty and rinse the dirty water tank. Follow maintenance tips for optimal suction power. For video instructions, check the manual download. Before … Read more

To use the Bissell QuickSteamer, spray the area with a pre-cleaner and let it sit for 3-5 minutes. Press the power switch, step on the handle release, and pull the trigger to spray cleaning solution. Move the cleaner back and forth to loosen stains. Follow the user manual for maintenance tips to ensure optimal carpet … Read more

To use the BISSELL ProHeat Pro-Tech carpet cleaner, pretreat stains with a pet stain remover. Fill the 2-in-1 and formula tanks with warm water. Ensure both tanks are secured. Plug in, turn on the machine, and recline the handle. Engage the trigger to spray while cleaning. Check the user manual for additional maintenance tips. Begin … Read more

To use the BISSELL ProHeat Plus carpet cleaner, plug in the power cord. Use the Handle Release Pedal to recline the unit. Fill the tank with warm tap water, not over 140°F/60°C. Pretreat any stains if needed. Choose the cleaning position and clean your carpet according to the provided instructions. Plug in the Bissell ProHeat … Read more

To use the BISSELL ProHeat Carpet Shampooer, plug it in and choose express clean mode. Fill the water compartment with warm water and the correct formula. Press the power button. Spray the dirty area with the trigger. Move slowly over the spot, then release the trigger to suck up the water. Move the shampooer slowly … Read more