To use the BISSELL ProHeat Plus carpet cleaner, plug in the power cord. Use the Handle Release Pedal to recline the unit. Fill the tank with warm tap water, not over 140°F/60°C. Pretreat any stains if needed. Choose the cleaning position and clean your carpet according to the provided instructions. Plug in the Bissell ProHeat … Read more
To use the BISSELL ProHeat Carpet Shampooer, plug it in and choose express clean mode. Fill the water compartment with warm water and the correct formula. Press the power button. Spray the dirty area with the trigger. Move slowly over the spot, then release the trigger to suck up the water. Move the shampooer slowly … Read more
Fill the Bissell PowerWash carpet cleaner’s water tank with hot water and carpet cleaning formula. Plug it in and turn it on. Press the trigger on the handle while moving the cleaner forward and backward over the carpet. This will clean stains and dirt. Repeat as needed for better results. For best results, focus on … Read more
Plug the PowerSteamer into a proper outlet and turn on the power switch. Press the trigger and slowly move the cleaner over the carpet. Avoid overwet areas. After cleaning, turn off the PowerSteamer and allow the BISSELL Advanced Deep Cleaning Formula to tackle tough soil for 1-2 minutes. When using the Bissell PowerSteamer, begin in … Read more
To use the Bissell ProHeat 2X Revolution Pet Pro, plug it into an outlet. Fill the clean water tank with hot water and cleaning solution. Assemble the unit securely. Press the Handle Release Pedal to recline for cleaning. Use the upholstery tool for detailed areas. Always keep the clean and dirty water tanks separate during … Read more
To use a Bissell Lift-Off Carpet Cleaner, press the spray trigger to apply cleaning solution on soiled surfaces. Move the tool in a back and forth motion, keeping contact with the carpet. Release the spray trigger and continue moving to suction water and dirt from the carpet for effective cleaning. Start with the upholstery or … Read more
To use a Bissell handheld carpet cleaner, press the power button located on the handle to turn it on. Place the tool over the stain and pull the trigger on the hose to apply cleaning solution. Move the tool in a back-and-forth motion. Release the trigger to suction up dirty water, and then turn off … Read more
To use the BISSELL DirtLifter Carpet Cleaner, press the Spray Release Trigger. Make one slow forward and back wet pass. Let the Deep Cleaning Formula and DirtLifter PowerBrush clean. Release the trigger and do another slow pass to remove residual dirty water. Be careful not to overwet the carpet. To fill the tank, open the … Read more
To use a Bissell Deluxe Carpet Cleaner, first vacuum the area to remove dirt. Pre-treat any stains with carpet shampoo. Then, fill the water tank with hot water and cleaning formula. Plug in the cleaner, press the trigger, and move it forward and backward to clean the carpet effectively. Using the Bissell Deluxe Carpet Cleaner … Read more
To use a Bissell DeepClean Premier Pet carpet cleaner, first power it on. Recline the handle and press the spray trigger. Make forward and backward passes for 15 seconds. Release the trigger to suction water. Repeat until no more water comes up. Clean the carpet in sections for best results. Plug in the cleaner and … Read more