To deflate a Vango mattress, start by unzipping the mattress and removing the air valve cap. Place the valve over the nozzle of a vacuum cleaner and turn on the vacuum cleaner to suck out the air. Once the mattress is fully deflated, roll the mattress up tightly and store it in a cool, dry place.
Do you have a Vango mattress and need to deflate it? Deflating your Vango mattress doesn’t have to be a difficult task. In this blog post, we will discuss the benefits of a Vango mattress, the supplies you need to deflate it, the step-by-step guide for deflating it, and some troubleshooting tips to help make the process easier. With these tips and tricks, you’ll be able to deflate your Vango mattress quickly and easily.
What You Need to Deflate a Vango Mattress
Deflating a Vango mattress requires understanding the type of valve the mattress has, as well as the width of the pad. Generally, the process involves setting the valve halfway between open and closed, which allows for maximum airflow out of the mattress. Additionally, you may need to inflate and deflate the mattress a few times to achieve the desired firmness. To ensure the most efficient deflation, you can flip the one-way system on its side to allow the air to escape. Finally, if the mattress has a mouthpiece, you can use it to help top up the mattress before closing the valve. By following these steps, you can ensure that your Vango mattress is deflated correctly and efficiently.
Step-by-Step Guide for Deflating a Vango Mattress
To begin the deflation process, start by locating the deflation valve.
Step 1: Locate the Deflation Valve
For those looking to deflate a Vango mattress, the process begins with locating the deflation valve. Fortunately, Vango mattresses come with a conveniently placed deflation valve that can be easily located. To find it, simply turn the mattress over and you will see the deflation valve at the end. It is a black, circular valve that should be inches away from the edge. Once you’ve located the valve, you are ready for the next step.
Step 2: Unscrew the Valve
Once you have located the valve, the next step is to unscrew it. To do this, you will need a flathead screwdriver. Begin by placing the screwdriver in the slot of the valve and turning it counter-clockwise. As you turn the screwdriver, the valve will become progressively more loose until it is completely unscrewed. At this point, you can remove the valve from the mattress. Be sure to store it somewhere safe as you will need to reattach it after the mattress is deflated.
Step 3: Insert the Hose of the Pump
Once you have connected the pump to the mattress, the next step in the deflating process is to insert the hose of the pump into the mattress valve. This ensures that the air is able to be extracted from the mattress. To do this, simply locate the mattress valve and insert the hose of the pump into the valve. Make sure the hose is securely inserted so that no air escapes during the deflation process. Once the hose is firmly in place, you can then turn on the pump and start the deflation process. With the help of this step-by-step guide, you can now easily deflate your Vango mattress and store it away until you need it again.
Step 4: Activate the Pump
Once the air has been released from the mattress, it’s time for Step 4: Activate the Pump. To activate the pump, you’ll need to plug the pump into a power source and turn it on. Once the pump is activated, it will start to draw the air out of the mattress and deflate it. Make sure to monitor the progress of the deflating process carefully and stop the pump when the mattress is deflated to your desired level. Additionally, you may need to adjust the air pressure to ensure the mattress stays deflated long-term. With the right care and maintenance, you can easily deflate your Vango Mattress and get a good night’s sleep!
Troubleshooting Tips for Deflating a Vango Mattress
To ensure that your mattress is properly deflated, follow these essential troubleshooting tips:
Tip 1: Make Sure the Valve is Unscrewed Properly
When deflating a Vango mattress, the first step is to make sure the valve is unscrewed properly. This is an essential step as it helps to ensure that air escapes properly during the deflation process. To unscrew the valve, begin by loosening the cap and rotating it counterclockwise. Once the cap is completely unscrewed, the valve should be easy to remove. Make sure to hold the valve as you unscrew it to avoid damaging the valve.
Next, check to ensure the valve is completely unscrewed and free from any obstructions. If the valve is not completely unscrewed, you may experience difficulty while deflating your mattress. If the valve appears to be stuck, try using a bit of lubricant around the area to help loosen it.
Finally, make sure to properly secure the valve once you have finished deflating the mattress. This will ensure that the valve does not become loose or damaged during transport. To secure the valve, simply rotate the cap clockwise until it is tight.
In conclusion, unscrewing the valve properly is a key step in the deflation process for a Vango mattress. Make sure to loosen the cap and rotate it counterclockwise, check that the valve is properly unscrewed, and secure the valve once you are done. Following these simple steps will help to ensure the deflation process is successful.
Tip 2: Check for any Kinks in the Hose
When troubleshooting a Vango mattress, Tip 2 is to check for any kinks in the hose. Kinks can prevent proper airflow from the mattress, causing it to deflate slowly or not at all. To ensure a smooth deflation process, inspect the hose for any bends, twists, or other obstructions. If necessary, gently straighten out any kinks and make sure the hose is lying flat. This will ensure maximum airflow and allow the mattress to deflate quickly. Remember, a kink in the hose can lead to an uncomfortable experience, so it is important to check for any kinks before using your Vango mattress.
Tip 3: Make Sure the Pump is Working Properly
Before attempting to deflate a Vango mattress, it is important to ensure that the pump is working properly. This is because a pump malfunction can lead to an incomplete deflation of the mattress. To ensure the pump is working properly, take the following steps:
• Check the power source: Make sure the power source to the pump is connected and functioning. • Inspect the cord: Inspect the cord to ensure it is not damaged or frayed. • Check the valve: Ensure that the valve is securely connected to the mattress and the pump. • Test the pump: Test the pump to see if it is working correctly.
By taking the time to check the power source, inspect the cord, check the valve, and test the pump, you can ensure that the pump is working properly before attempting to deflate a Vango mattress. This will help you avoid any potential problems and make the deflation process go smoothly.
Conclusion
In conclusion, the Vango mattress offers a comfortable sleeping experience and is incredibly easy to deflate. All you need is a pump and the deflation valve located on the mattress. Following the step-by-step guide and troubleshooting tips provided in this article, you should have no trouble deflating your Vango mattress. By deflating your mattress, you can store it, transport it, or even give it to someone else.
Related Post:
