How to Use a Hoover Max Extract 60 Carpet Cleaner for Effective Deep Cleaning

To use the Hoover MaxExtract 60 carpet cleaner, first plug the power cord into an electrical outlet. Turn it on with the power switch. Choose the cleaning mode you need. As a wet system, it does not need a dust filter. Handle the clean water tank carefully to avoid overflow. Refer to the user manual for troubleshooting and detailed instructions.

Plug in the Hoover Max Extract 60 and turn it on. Select the desired cleaning mode based on your carpet type and level of dirtiness. Begin cleaning by slowly pushing the machine forward while squeezing the trigger to release the cleaning solution. Then, pull it back to extract the dirty water. Overlapping each pass ensures thorough cleaning.

After cleaning, empty the dirty water tank and rinse it with clean water. Allow your carpets to dry completely before replacing any furniture. Regularly maintaining your carpet enhances its appearance and longevity, making the Hoover Max Extract 60 an essential tool for deep cleaning.

As you engage with your carpet cleaner, consider additional techniques for maintaining your carpets between deep cleans. These methods can reduce the buildup of dirt and extend the life of your carpets.

What Is the Hoover Max Extract 60 Carpet Cleaner and What Makes It Effective?

The Hoover Max Extract 60 Carpet Cleaner is a device designed for deep cleaning carpets and upholstery. Its dual-brush system and hot water extraction feature allow it to effectively remove dirt, stains, and allergens from fabric surfaces.

According to Hoover, this appliance utilizes advanced extraction technology to deliver effective cleaning results. This information is corroborated by the manufacturer’s guidelines and product specifications available on their official website.

The Hoover Max Extract 60 incorporates several components for optimal performance. It features a powerful motor, heated cleaning solution, and multiple cleaning modes for different surfaces. The machine is equipped with large tanks for dirty and clean water, minimizing the need for frequent refills during cleaning sessions.

The Consumer Product Safety Commission defines carpet cleaners as devices that remove dirt and stains from carpets using either dry or wet methods. These definitions highlight the importance of such machines in maintaining clean and healthy environments.

Factors contributing to carpet cleaning needs include pet ownership, high foot traffic, and environmental allergens. These elements can result in accumulated dirt and stains, making deep cleaning essential for maintaining hygiene.

According to the Carpet and Rug Institute, professional cleaning methods can remove up to 94% of common household allergens. This underscores the efficacy of machines like the Hoover Max Extract 60 in promoting healthier indoor air quality.

Deep cleaning with devices like the Hoover Max Extract can improve both residential and commercial environments. By using such equipment, individuals can enhance aesthetics and hygiene in their spaces.

Health impacts of clean carpets include reduced allergy symptoms and improved overall wellness. Environmental concerns arise with excessive use of chemicals in cleaning solutions, which can contaminate water supplies.

Examples of improved indoor air quality include homes where regular carpet cleaning is practiced. This can lead to fewer respiratory issues and a healthier living environment.

To optimize carpet cleaning, the Environmental Protection Agency recommends using low-residue cleaning products and proper vacuums. These practices can minimize chemical exposure and enhance the efficiency of cleaning sessions.

Specific strategies include regularly scheduling professional cleaning and maintaining appropriate humidity levels to prevent mold growth. Utilizing technologies such as eco-friendly cleaning solutions further promotes health and environmental benefits.

What Preparations Should You Take Before Using the Hoover Max Extract 60?

To prepare for using the Hoover Max Extract 60, you should gather the necessary supplies and ensure the area is ready.

Main preparations include:
1. Reading the user manual.
2. Assembling the machine.
3. Filling the water tank.
4. Choosing the right cleaning solution.
5. Clearing the area of any obstacles.
6. Pre-treating stains.

After outlining these preparations, it is essential to delve into each one to ensure proper usage and maximize effectiveness.

1. Reading the User Manual: Reading the user manual is crucial for understanding the features and functions of the Hoover Max Extract 60. The manual provides essential safety information and specific instructions for assembly, operation, and maintenance. Familiarity with the manual ensures you do not overlook any important steps that could affect the cleaning process.

2. Assembling the Machine: Assembling the machine involves attaching necessary parts, such as the handle and water tanks. Follow the assembly instructions in the user manual carefully. Proper assembly ensures the machine operates effectively. A well-assembled unit minimizes the risk of malfunction during use.

3. Filling the Water Tank: Filling the water tank is a key preparation step. Use clean, warm water and follow the indicated fill line. Overfilling can cause leaks, while underfilling may reduce cleaning effectiveness. The water-to-cleaning solution ratio should align with manufacturer recommendations for optimal performance.

4. Choosing the Right Cleaning Solution: Choosing the right cleaning solution is essential for achieving desired results. Use a solution specifically designed for carpet cleaners. The Hoover Max Extract 60 is compatible with various solutions, including pet stain removers. Selecting the right product can enhance cleaning efficiency and protect carpet fibers.

5. Clearing the Area of Any Obstacles: Clearing the area of any obstacles ensures an efficient cleaning process. Remove furniture, rugs, and other items from the area. This preparation minimizes interruptions and allows for thorough cleaning. A clear workspace promotes safe movement and reduces the risk of accidents.

6. Pre-treating Stains: Pre-treating stains can significantly improve overall cleaning effectiveness. Apply a specialized stain remover to problem areas before using the carpet cleaner. Allow the pre-treatment to dwell for a recommended time to break down stains. This step enhances the cleaner’s ability to lift tough stains during the cleaning cycle.

By ensuring these preparations are completed, you can effectively use the Hoover Max Extract 60 for optimal carpet cleaning results.

How Can You Gather All the Necessary Supplies for Cleaning?

Gathering all the necessary supplies for cleaning requires careful planning and organization to ensure you have everything on hand. This process involves identifying required cleaning supplies, organizing them effectively, and ensuring they are accessible for use.

1. Identify required cleaning supplies: Determine the cleaning tasks you need to perform. Common supplies include:
   – All-purpose cleaner: Effective for various surfaces.
   – Glass cleaner: Useful for windows and mirrors.
   – Disinfectant: Essential for sanitizing surfaces.
   – Sponges and cloths: Important for scrubbing and wiping.
   – Broom and vacuum: Necessary for floor cleaning.
   – Trash bags: Needed for debris disposal.

2. Create a checklist: Once you determine your supplies, make a list. This checklist helps you avoid forgetting any items. A study from The Home Improvement Research Institute (2021) emphasizes the importance of checklists in improving efficiency and ensuring completeness in task execution.

3. Organize supplies: Use containers or storage bins to keep cleaning supplies together. Place them in a designated cleaning caddy or cupboard. An organized system allows for quick access. Research from the American Cleaning Institute (2020) indicates that organized cleaning tools can reduce the time spent searching for supplies, increasing cleaning efficiency.

4. Ensure accessibility: Store your cleaning supplies in a location that is easy to access. Consider keeping frequently used items under the sink or in a closet near the cleaning areas. Accessible supplies encourage regular cleaning and maintenance.

5. Regularly check inventory: Periodically assess your cleaning supplies. Replace empty or expired products to ensure you always have what you need. The National Sanitation Foundation (2019) suggests maintaining an inventory to avoid last-minute trips to the store, which can disrupt cleaning plans.

By following these steps, you can effectively gather all necessary cleaning supplies, ensuring that your cleaning routine is efficient and thorough.

What Should You Move or Protect in Your Space Before Cleaning?

Before cleaning your space, you should move or protect valuable and vulnerable items to prevent damage and maintain organization.

1. Electronics
2. Furniture
3. Decorative items
4. Fragile items
5. Personal belongings
6. Cleaning supplies
7. Food items

It is essential to consider various perspectives on which items to protect. While some may prioritize electronics over decor, others may focus on preserving personal keepsakes or fragile items.

1. Electronics:
   Moving or protecting electronics refers to devices such as computers, televisions, and sound systems. Electronics are sensitive to dust and liquid damage. Exposure during cleaning can lead to malfunction. According to Consumer Reports, the average household contains multiple devices that, if damaged, could lead to costly repairs. Electronics should be disconnected and stored safely away from cleaning areas.

2. Furniture:
   Protecting furniture means safeguarding both upholstered and hard surface items. Furniture can be scratched or stained during cleaning. The American Society of Interior Designers recommends covering or moving furniture to avoid damage from cleaning solutions. For example, placing blankets or plastic covers can protect surfaces from chemical exposure.

3. Decorative Items:
   Decorative items include vases, picture frames, and knickknacks. These items often possess sentimental value. A study by the International Furnishings and Design Association states that mishaps can easily occur when cleaning ladders or vacuums move through a space. Removing these items is prudent to prevent accidental breakage.

4. Fragile Items:
   Fragile items encompass delicate decorative pieces, ceramics, and glassware. These objects can break easily. The National Association of Professional Organizers suggests storing these items in safe locations before cleaning. This practice minimizes the risk of chipping or breaking during the cleaning process.

5. Personal Belongings:
   Personal belongings include clothes, bags, and valuables. Items such as jewelry or paperwork can be misplaced when cleaning. The American Cleaning Institute emphasizes the importance of keeping personal items organized. Clearing these from surfaces before cleaning can enhance tidiness and reduce stress.

6. Cleaning Supplies:
   Cleaning supplies themselves should be secured. Chemicals can be hazardous if spilled. The U.S. Environmental Protection Agency (EPA) advises keeping cleaning products stored in cabinets out of reach. This step protects individuals and pets from accidents and maintains organized cleaning spaces.

7. Food Items:
   Food items, particularly in kitchens, should be protected during cleaning. Counter surfaces can harbor contaminants. According to the CDC, food safety can be compromised if cleaning agents mix with food. It is advisable to store perishable items in the refrigerator and unopened food in cabinets.

By considering these elements before cleaning, you ensure safety and maintain the integrity of your space.

How Do You Properly Operate the Hoover Max Extract 60 Carpet Cleaner?

To properly operate the Hoover Max Extract 60 Carpet Cleaner, follow these key steps: prepare the machine, fill the water compartment, select the cleaning mode, maneuver the cleaner, and maintain the appliance after use.

First, prepare the machine by ensuring it is plugged in and the power switch is turned on. This step ensures that the cleaner operates effectively. Next, fill the water compartment with water and the appropriate cleaning solution. The cleaner typically uses a specified mixture, so refer to the user manual for the correct ratios.

Once filled, select the cleaning mode based on the surface you are cleaning. The Hoover Max Extract 60 offers options for deep cleaning or quick cleaning. Deep cleaning provides a thorough clean, while quick cleaning is suitable for lighter stains.

When using the carpet cleaner, maneuver it slowly and steadily across the carpet. Move forward to extract dirt and grime, and then move back to press additional solution into the carpet fibers. Maintain a consistent speed to avoid leaving streaks or wet areas.

Finally, maintain the appliance after use by emptying the dirty water tank. Rinse it out to prevent soap scum buildup and ensure the machine is cleaned regularly. Store the cleaner in a dry place to prevent mold and mildew growth in the hoses or tanks.

By following these steps, users can achieve effective and efficient carpet cleaning with the Hoover Max Extract 60.

What Are the Steps for Filling the Clean Water Tank Correctly?

The steps for filling the clean water tank correctly include preparation, water source selection, tank filling, and maintenance checks.

1. Preparation
2. Water source selection
3. Tank filling
4. Maintenance checks

Filling the clean water tank correctly involves precise steps that ensure effective cleaning and equipment longevity.

1. Preparation:
   Preparation is crucial before filling the clean water tank. This step includes gathering necessary supplies and ensuring that the carpet cleaner is unplugged for safety. Preparing a designated water area helps minimize spills and makes the process organized.

2. Water Source Selection:
   Water source selection refers to the choice of water used for filling the tank. It is advisable to use clean, tap water or distilled water, as some carpet cleaners recommend against using hot water or water with additives. Choosing the right water helps maintain the integrity of the machine and prevents damage.

3. Tank Filling:
   Tank filling involves pouring water into the clean water tank using a funnel for precision. It is vital to fill the tank to the marked line, as overfilling can cause leaking and reduced effectiveness. Ensuring no debris or particles get into the tank during this process keeps the cleaner functioning well.

4. Maintenance Checks:
   Maintenance checks include inspecting the water tank for damage and ensuring all seals are intact after filling. This step ensures that there are no leaks when the cleaner is in operation. Regular checks of the tank and associated parts enable longevity and reliability of performance.

By following these steps, users can ensure their carpet cleaner operates effectively while maintaining water quality and machine health.

How Should You Add Cleaning Solution to Achieve Best Results?

To achieve the best results when adding cleaning solution, it is essential to follow the manufacturer’s instructions for the specific cleaning machine being used. Most cleaning machines typically require a mixture of cleaning solution and water in a standard ratio of 1:4, with 20% cleaning solution and 80% water. This ratio can vary based on the level of dirt and the type of surface being cleaned.

The effectiveness of the cleaning solution often decreases if used in higher concentrations than recommended. For instance, using too much cleaning solution can lead to residue buildup, which may attract dirt and cause surfaces to become sticky. In practical terms, when cleaning carpets, a standard 32-ounce bottle of concentrated cleaner can effectively treat about 500 square feet when diluted properly.

Several factors can influence cleaning performance, including surface type, soil level, and cleaning technique. For instance, heavily soiled carpets may require a pre-treatment before applying the cleaning solution. Additionally, using warm water instead of cold can enhance the cleaning power of the solution. However, it’s important to avoid very hot water, as it can sometimes damage certain fabrics.

Another consideration is water hardness, which can affect the performance of cleaning solutions. Hard water can reduce the effectiveness of certain cleaners, making it vital to use soft or distilled water if possible.

In conclusion, adding cleaning solution correctly can significantly boost cleaning outcomes. Maintaining the recommended solution-to-water ratio, considering surface types, and adjusting for water hardness are all critical factors for effective cleaning. Future exploration could include examining specific cleaning solutions tailored for particular surfaces or cleaning equipment advancements in the home cleaning industry.

What Techniques Do You Use for Effective Carpet Cleaning with the Hoover Max Extract 60?

To achieve effective carpet cleaning with the Hoover Max Extract 60, follow specific techniques that enhance cleaning results.

1. Pre-treat stains.
2. Use the appropriate cleaning solution.
3. Adjust the nozzle settings.
4. Follow a systematic cleaning pattern.
5. Allow sufficient drying time.
6. Perform regular maintenance on the machine.

Understanding these techniques can help ensure a thorough cleaning process and optimal machine performance.

1. Pre-Treat Stains:
   Pre-treating stains involves applying a separate stain remover before using the carpet cleaner. This technique helps to break down tough stains for better removal. For example, Hoover recommends using a solution specifically designed for this machine. Pre-treatment can enhance cleaning effectiveness, especially for high-traffic areas or old stains.

2. Use the Appropriate Cleaning Solution:
   Using the right cleaning solution is critical for achieving optimal results. The Hoover Max Extract 60 works best with Hoover’s specially formulated cleaning solutions. These formulas are designed to optimize the machine’s suction and break down dirt and grime effectively. Failure to use the correct solution may lead to residue buildup or ineffective cleaning.

3. Adjust the Nozzle Settings:
   Adjusting the nozzle settings can improve cleaning efficiency. The Hoover Max Extract 60 features settings for different carpet types. Fine tuning the nozzle height allows for better adaptation to both low and high pile carpets. This adjustment enables efficient dirt removal while preventing potential damage to carpet fibers.

4. Follow a Systematic Cleaning Pattern:
   Using a systematic cleaning pattern ensures that the entire carpet is addressed uniformly. Move the machine in straight lines or a grid pattern. Overlapping each pass helps to lift as much dirt as possible. For example, cleaning one area from left to right before moving to the next ensures thorough coverage.

5. Allow Sufficient Drying Time:
   Allowing sufficient drying time is essential to avoid mildew and odors. After cleaning, the carpet may remain damp for several hours. Use fans or open windows to facilitate airflow and speed up drying. This step is crucial in maintaining carpet health and prolonging its lifespan.

6. Perform Regular Maintenance on the Machine:
   Regular maintenance of the Hoover Max Extract 60 helps ensure long-term effectiveness. Clean the brushes and filters after each use. Check the hoses for blockages to maintain optimal performance. Routine upkeep prolongs the life of the machine and ensures powerful cleaning with every use.

Following these techniques will help you maximize the performance of your Hoover Max Extract 60 carpet cleaner and achieve remarkable cleaning results.

How Do You Remove Tough Stains Efficiently?

To remove tough stains efficiently, you should identify the stain type, choose the right cleaning solution, apply the solution properly, and follow up with thorough rinsing and drying. Each of these steps plays a critical role in ensuring effective stain removal.

1. Identify the stain type: Different stains require specific treatment methods. For instance, grease stains need oil-based solvents, while protein stains like blood or dairy are better treated with cold water.

2. Choose the right cleaning solution: Select a cleaning solution based on the stain type. Research suggests that enzymatic cleaners break down protein-based stains effectively due to their biological enzymes. According to a study by the American Cleaning Institute (ACI) in 2020, enzyme-based cleaners can remove over 80% of protein stains when used correctly.

3. Apply the solution properly: Apply the cleaning solution directly onto the stain. Use a blotting motion with a cloth or sponge. Rubbing can spread the stain further. The ACI emphasizes that blotting helps lift the stain from the fabric rather than embedding it deeper.

4. Rinse thoroughly: Rinse the area with cold water after treatment. This step removes any remaining cleaner or dissolved stain residues, aiding in preventing re-soiling. The University of Georgia’s Cooperative Extension suggests rinsing with water ensures that cleaning agents do not attract dirt once the fabric dries.

5. Dry the area: Allow the area to dry completely. Air drying prevents mold growth, especially in damp conditions. The ACI recommends using a fan or dehumidifier in high-humidity environments to speed up the drying process.

By following these steps systematically, you can efficiently tackle tough stains and maintain the quality of your surfaces or fabrics.

What Should You Do After Using the Hoover Max Extract 60 Carpet Cleaner?

After using the Hoover Max Extract 60 Carpet Cleaner, you should properly maintain the unit and assess the cleaned area.

1. Clean the machine components.
2. Empty and rinse the dirty water tank.
3. Refill and clean the solution tank if necessary.
4. Allow the machine to dry properly.
5. Vacuum the carpet after drying.
6. Check for any missed spots or stains.

These steps are vital for maintaining performance and ensuring effective cleaning in future uses.

1. Clean the Machine Components: Cleaning the components of the Hoover Max Extract 60 Carpet Cleaner involves removing and rinsing the brushes, filters, and tanks. This prevents residue build-up, which can affect the machine’s efficiency. Regular maintenance helps prolong the life of the cleaner.

2. Empty and Rinse the Dirty Water Tank: After cleaning, the dirty water tank collects soil and cleaning solution. It’s essential to empty and rinse this tank promptly to avoid mold or bad odors. Leaving dirty water inside can lead to bacteria growth, which poses health risks.

3. Refill and Clean the Solution Tank if Necessary: The solution tank may require additional cleaning to prevent any residual buildup from the cleaning solution. Rinsing this tank ensures that the next cleaning session delivers optimal performance.

4. Allow the Machine to Dry Properly: After cleaning, it’s important to let the cleaner dry. This reduces moisture retention and prevents mildew and mold formation. A dry machine is also more effective for future cleaning tasks.

5. Vacuum the Carpet After Drying: Once the carpet is completely dry, vacuuming helps to lift any residual dirt that may have settled and restores a fresh appearance. This ensures a well-finished look to the cleaned area, enhancing the overall effectiveness of the cleaning process.

6. Check for Any Missed Spots or Stains: After cleaning and drying, inspect the carpet for any remaining stains. If you identify missed spots, it may be necessary to repeat the cleaning process in these areas. This ensures the carpet remains clean and well-maintained.

Following these steps will enhance the performance of your Hoover Max Extract 60 Carpet Cleaner and ensure your carpet looks and feels its best.

How Should You Empty and Clean the Dirty Water Tank?

To empty and clean a dirty water tank effectively, first turn off the carpet cleaner and unplug it. The dirty water tank typically holds around 2 to 3 gallons of fluid. After ensuring it is no longer in use, lift the dirty water tank from the machine and carry it to a sink or drain.

Next, pour out the dirty water into the sink or drain. Some tanks feature a spout for easier pouring. It is advisable to wear gloves to protect your hands from any residue. Rinse the tank thoroughly with warm water. Use a soft brush or cloth to scrub any stubborn dirt or debris from the tank’s interior. For best results, clean the tank once every couple of uses to prevent buildup.

Consider that the amount of dirt collected can vary based on usage. For example, heavily soiled carpets may fill the tank more quickly, requiring more frequent cleaning compared to light cleaning. Factors such as carpet type, room size, and frequency of cleaning also influence how quickly the tank needs to be emptied.

In conclusion, regularly emptying and cleaning the dirty water tank promotes the cleaner’s efficiency and longevity. Maintaining a routine of cleaning the tank after every few uses is beneficial for optimal performance. For further insights, explore the different maintenance needs of carpet cleaners based on their specific models and usage.

What Maintenance Is Necessary to Keep the Hoover Max Extract 60 in Good Condition?

To keep the Hoover Max Extract 60 in good condition, regular maintenance is necessary. This maintenance ensures optimal performance and prolongs the life of the machine.

Main maintenance points for the Hoover Max Extract 60 include:
1. Regularly clean the tanks and filters.
2. Inspect and clean the brushes.
3. Check hoses and connections for blockages.
4. Replace worn or damaged parts as needed.
5. Store the machine properly after use.

Maintaining the Hoover Max Extract 60 is vital for its longevity and efficiency. Each aspect of maintenance supports smooth operation and effectiveness during cleaning tasks.

1. Regularly Clean the Tanks and Filters: Regularly cleaning the tanks and filters in the Hoover Max Extract 60 prevents clogs and ensures proper suction. Dirt and debris can accumulate in tanks, affecting performance. For instance, a clogged dirty water tank may lead to inefficient cleaning and requires frequent emptying. According to manufacturer guidelines, empty and clean the tanks after each use to maintain peak performance.

2. Inspect and Clean the Brushes: Inspecting and cleaning the brushes is crucial for the Hoover Max Extract 60’s effectiveness. Brushes can become tangled with hair and fibers over time, which impairs their ability to scrub surfaces. Regularly removing debris ensures optimal cleaning power. Users should check the brush section weekly or after major cleaning jobs to keep performance at its best.

3. Check Hoses and Connections for Blockages: Checking the hoses and connections for blockages is essential to ensure uninterrupted operation. Any blockages in the hoses can hamper suction and reduce cleaning efficiency. Users should visually inspect hoses for any signs of clogs and remove any debris found. The manufacturer recommends performing this check before and after using the machine.

4. Replace Worn or Damaged Parts as Needed: Replacing worn or damaged parts is necessary to maintain the Hoover Max Extract 60’s functionality. Over time, parts such as belts or filters may degrade, leading to performance issues. It is advisable to consult the user manual for part replacement guidelines and to order replacements from authorized dealers to ensure compatibility.

5. Store the Machine Properly After Use: Proper storage of the Hoover Max Extract 60 prevents damage and keeps it ready for future use. Storing the machine in a dry and cool location protects against moisture and heat damage. Additionally, users should ensure that all components, such as tanks and brushes, are securely placed back onto the machine. This step prevents parts from accidental damage and ensures ease of access for the next use.

What Are the Main Benefits of Using the Hoover Max Extract 60 Carpet Cleaner?

The main benefits of using the Hoover Max Extract 60 Carpet Cleaner include its effective cleaning performance, convenient design, and advanced features.

1. Effective Cleaning Performance
2. Convenient Design
3. Advanced Features

Effective Cleaning Performance: The Hoover Max Extract 60 Carpet Cleaner provides excellent cleaning by using powerful suction and deep-cleaning brushes. This combination helps remove dirt, stains, and allergens from carpets and upholstery. The dual tank system separates clean and dirty water, ensuring thorough cleaning. User reviews often highlight how well it removes tough stains, showcasing its effectiveness.

Convenient Design: The Hoover Max Extract 60 Carpet Cleaner is designed for user convenience. It features a lightweight frame, making it easy to maneuver while cleaning. Its long power cord allows for a wider cleaning radius without needing to change outlets frequently. Additionally, the cleaner has a removable nozzle, simplifying maintenance and rinsing after use.

Advanced Features: The Hoover Max Extract 60 Carpet Cleaner includes advanced features such as Spin Scrub technology. This technology utilizes rotating brushes that clean both forward and backward, improving efficiency. It also has a heated cleaning function that helps extract tough stains with heated water. These features contribute to a more effective carpet cleaning experience, as users report faster drying times and enhanced cleanliness.

Overall, these benefits establish the Hoover Max Extract 60 Carpet Cleaner as a reliable option for maintaining clean carpets and upholstery.

Related Post:

• How to use a hoover power path carpet washer
• How to use a hoover power scrub carpet cleaner
• How to use a hoover power scrub xl carpet cleaner
• How to use a hoover spinscrub 50 carpet cleaner
• How to use a hoover spinscrub carpet cleaner