At SleepBloom, we believe that a good night’s sleep is the foundation of a healthy life. Let us help you bloom into your best self through restful sleep, starting tonight

To lay wool carpet using direct glue installation, apply high solids adhesive to the jute backing. Use a 1/8” U notch trowel to spread the adhesive evenly. After placing the…

To lay whole home carpet, follow these steps: Measure the room dimensions. Prepare the subfloor. Install carpet tack strips around the edges. Add carpet padding. Measure and cut the carpet…

To lay waterfall stair carpeting, use the installation method that covers the tread and descends the riser. This creates a clean, cascading effect. First, measure your stairs. Next, cut the…

To lay very thin carpet, first, nail tack strips to the floor. Next, lay carpet padding over the strips. Use a knee kicker to stretch the carpet into place. Make…

To lay used carpet, start by removing the old carpet and cleaning the subfloor. Install tack strips around the edges. Next, roll out carpet padding, then lay the carpet on…

To lay carpet to tile on unlevel floors, first, level the uneven subfloor with a floor leveler. Use a transition strip for a smooth edge between the carpet and tile….

To lay carpet on uneven floors, first evaluate the bumps. Use masonite or plywood to create a level surface. Install a quality underlay for cushioning. Sand any high spots. Lastly,…

To lay Traffic Master Mainstream outdoor carpet, follow these steps: prepare the surface by cleaning and smoothing it, then unroll and center the carpet. Trim the edges and apply adhesive….

To lay tile after removing carpet, first cut the carpet with a utility knife and pull up the carpet pad. Prepare the plywood subfloor for underlayment. Use a notched trowel…

To lay temporary carpet, start by removing furniture and vacuuming the area. Use interlocking tiles for easy installation. Add non-slip pads to prevent shifting. For high-pile carpets, place plywood underneath…

To lay striped carpet on stairs and landings, start by securing carpet padding. Align the stripes lengthwise on the stairs and across the landing. Cut at right angles for a…

To lay snap flooring next to carpet, remove furniture and vacuum the area. Cut the carpet and padding, then use a pry bar to take out tack strips. Install a…